SAW Consumables
-
-
FGB
The FGB method is used in single-sided welding used for ships, bridges, and steel structures involves attaching a cushioning material to the back of a steel plate and then filling the groove with alloy powder to achieve one-time shaping of steel plates under 25mm.
-
-
TGF-SJ501 TGM-30
This method can use single-wire, double-wire or multi-wire, which can be used in high-speed welding of thin plates. The welding speed can reach 1.5m/min. The product can be applied to ordinary structural steel and ship structural steel.
-
TGF-988 TGM-EM13K
This method can be used in high-speed welding of thin plates, with a welding speed of up to 2.5m/min. It is especially suitable for high-speed horizontal fillet welding with double-wire (thin wire with diameter φ1.6mm). The product can be applied to ordinary structural steel and ship structural steel.
-
TGF-SJ101q TGM-H50Q
Applicable for welding of Q370q steel plates used in bridges, which can obtain good low-temperature impact toughness. The welded joint has a lower diffusion hydrogen content. The product can be used for bridge steel, pipeline steel, and wind power steel.
-
TGF-SJ101q TGM-H60Q
Applicable for welding of Q420q steel plate for bridge steel, which can obtain good low-temperature impact toughness. The welded joint has a lower diffusion hydrogen content. The product can be used for bridge steel, pipeline steel, wind power steel, and steel structures.
-
TGF-SJ105q TGM-H65Q
Applicable for welding of Q500qE steel plates for bridge steel, which can achieve good low-temperature impact toughness, and the welded joint has a lower diffusion hydrogen content. The product can be applied to high-strength steel for bridges and high-strength steel for marine engineering.
-
TGF-SJ105q TGM-H60QS
Applicable for welding of Q500qE steel plates for bridge steel, which can achieve good low-temperature impact toughness, and the welded joint has a lower diffusion hydrogen content. The product can be applied to high-strength steel for bridges and high-strength steel for marine engineering.
-
TGF-SJ101 TGM-50
Applicable for butt welding of medium-thick plates, which can be used for single-sided single-pass welding of steel plates below 30mm. The product can be applied to ordinary structural steel, bridge steel, ship structural steel, and pipeline steel.